top of page
FAIRYLAND - Fully Balanced Bridge Transistor Power Amplifier
FAIRYLAND features a unique design with strong drive capabilitydeep and controlled bass clear highs and rich detail
Ordinary integrated amplifiers lack power and control, failing to unleash the full potential of your speakers. The Fairyland Power Amplifier features a high-current transistor design with a continuous output of 130W × 2 (8Ω) and 210W × 2 (4Ω load). With ample dynamic reserves, it effortlessly drives speakers with 2-8Ω impedance, delivering solid and tight bass, and transparent, refined highs.
.jpg)
The FAIRYLAND amplifier utilizes custom Toshiba power transistors from a renowned international brand, along with ELNA 10,000μF audio capacitors. With a total harmonic distortion of just 0.002%, it meetsHI-END standards.
The Dual-Lane Revolution of Energy Output
Traditional Single-Ended Architecture: Similar to a single-lane highway, where both positive and negative half-cycle signals share the same path, leading to congestion and distortion. Fully Balanced Architecture: Positive and negative signals are routed through separate circuits (dual-lane), doubling the dynamic headroom. Measured Performance: - Sustained output of 210W × 2 under a 4Ω load - Distortion rate below 0.002% even during peak dynamic orchestral passages
Why do professional players prefer a fully balanced architecture?
Physical add-on for noise elimination
→ In balanced transmission, external interference (such as electromagnetic waves and power noise) simultaneously affects both the positive and negative signal lines. → Inside the amplifier, a differential circuit cancels out the interference signals by subtraction. Fairyland Amplifier features a 120dB signal-to-noise ratio.
Fully balanced architecture is not just a marketing concept; it combats interference through symmetrical design at the physical level. For audio systems in the ten-thousand-yuan range, it can be a cost-effective solution to break through sound quality bottlenecks—delivering purity close to high-end separate systems without the need for ultra-expensive cables.
Is the sound quality thin and
lacking musical engagement?
Transistor amplifiers often have a strong "digital flavor," while tube amplifiers have low power and slow response. The Fairyland amplifier features an innovative "Tube-Transistor Hybrid Tuning" technology, preserving the high resolution of transistors while incorporating tube-like harmonic enhancement. Vocals are as warm as a tube amp, while instrument separation rivals that of high-end solid-state amplifiers.
switch
RIGHT SPEAKER
ANALOG IN
LEFT SPEAKER
power supply
The Uniqueness of Fairyland
The low-noise toroidal transformer is physically isolated from the signal ground, eliminating ground loop hum. ELNA capacitor banks are symmetrically distributed on both sides of the PCB, shortening the power supply path.
Proprietary Binding Posts The dual-wire crossover design (balanced architecture requires higher current handling capacity) features a plating thickness of 50μm, reducing oxidation speed by 80% compared to standard terminals.
Power Input: AC 115V/60Hz, 230V/50Hz (automatic selection)
Remote Control Function: Supported (infrared).
Worried about damaging your speakers
when switching equipment?
Not confident in handling complex setups?
Fairyland fivefold safety protection system Automatic power cut-off for overload, short circuit, overheating, DC leakage, and power surges. Proprietary pure copper binding posts Prevents oxidation-induced poor connections, ensuring long-term stability.
.jpg)
Product size
Redefines elegance and performance with its sleek, robust design, meticulously crafted from high-quality brushed aluminum. With its classic dimensions, it integrates seamlessly into any high-end audio setup, exuding an unmistakable premium feel
146 mm
(Includes feet)
373 mm
330 mm
PRODUCT SPECIFICATIONS
· Fully balanced power amplifier.
. Imported TOSHIBA power transistors.
. Low-noise toroidal transformer.
· Large imported ELNA capacitors.
· Multiple protection features: overload, short circuit, overheating, and DC protection.
. Power input: AC 115V/60Hz, 230V/50Hz (automatic selection).
. Front panel button: Standby button.
. Display: LED indicator.
. Remote control function: Supported (infrared).
. Input support: 2 sets of XLR balanced connectors (left and right channel balanced input).
. Power output: Proprietary binding posts.
. Specifications: XLR output power: 130W x 2 (8Ω load) / 210W x 2 (4Ω load).
. Frequency response: 10Hz - 78kHz (+1, -3dB).
. Total harmonic distortion (THD): 0.002% (A-weighted).
. Signal-to-noise ratio (SNR): 120dB (A-weighted).
. Stereo crosstalk:-110dB.
. Power supply: 115V/60Hz, 230V/50Hz (automatic selection).
. Total power consumption: 430W (8Ω load).
bottom of page